Aria, clima, elettrificazione, acque e biodiversità. 38925 articoli raccolti da fonti istituzionali e specializzate, classificati per area ambientale e linkati al porto di riferimento.
Port of Long Beach launches $1 million prize for first carrier to bunker methanol at the port Pacific Environment
The transition to cleaner shipping took a major step forward yesterday as the Long Beach Board of Harbor Commission approved a first–of-its kind $1 million incentive to support commercial scale methanol bunkering at the Port of Long Beach. TheClean Fuel Bunkering Challenge Incentive Awardis designed to help move the maritime sector away from conventional dirty fossil fuels and toward cleaner alternatives capable of reducing harmful air pollution, better protect public health and cut climate emissions that contribute to rising temperatures and extreme weather events. There are already more than 400 dual-fuel methanol vessels currently operating or on order globally and are expected to call at major ports such as Long Beach. However, many of these vessels continue to run on hazardous, health-harming conventional fuels due to the lack of available green methanol fuel infrastructure along the West Coast. “Frontline communities in Los Angeles and Long Beach suffer from some of the worst pollution in the nation,” saidCristhian Tapia-Delgado, Climate Campaigner for Southern California, Pacific Environment. “We applaud the Port of Long Beach for approving $1 million to move ocean shipping lines to clean bunkering, but we urge the Port to do everything possible to ensure the cleanest, safest and most sustainable alternative fuels are the ones that achieve long-term success at the Port.” The Port of Long Beach has long served as a national leader in deploying shore power infrastructure and advancing emissions-reduction technologies, and we must ensure this momentum continues as the next generation of cleaner vessels enters service. Achieving the Port of Long Beach’s goals of phasing out emissions from all seaport-related activities will require a large-scale transition to next-generation maritime fuels capable of achieving low- and near-zero greenhouse gas emissions. “We know there is no single, magic fuel solution today, but methanol is emerging as one of the leading fuel alternatives in the maritime industry, said Davina Hurt,Climate Policy Director for Pacific Environment.“As this transition moves forward, shippers and the port must ensure that robust safety precautions must be in place to protect port workers and surrounding communities. At the same time, we urge shipping companies and the Port of Long Beach to carefully choose the cleanest and safest fuel today, choosing any type of methanol is short-sighted. Not all methanol pathways are equal, and long-term investments should focus on truly green methanol solutions that deliver the strongest climate and public health benefits.” According to the ports’ own emission inventories,shipping remains the largest source of NOx emissionsat the San Pedro Bay ports. The San Pedro Bay port complex — handling roughly 40% of all containerized U.S. cargo — is the largest single source of air pollution in the metropolitan region. Port-adjacent, working-class communities of color (like West Long Beach, Wilmington, and San Pedro) experience significantly elevated rates of asthma and up to eight years lower life expectancy due to disproportionate exposure to diesel pollution. The Port of Long Beach must send a clear signal to the maritime industry that the world’s cleanest fleets are welcomed and supported here — This $1 million dollar investment, if implemented correctly, is the first place to start. “This incentive can help catalyze the next chapter of cleaner shipping and help accelerate the deployment of innovative ships and fuels that will define the maritime industry of the future,” Hurt added. ### Pacific Environment confronts our most urgent environmental issues by connecting local and global movements, catalyzing policy change and inspiring action for the benefit of people and our planet. Together, we promote a healthy climate, reduce pollution and conserve biodiversity for an equitable and thriving future.
📰 The Salt Lake Tribune📅 2026-05-27enAria · inquinamento
A multimillion-dollar project looks to cut down waits at SLC train crossings and boost air quality The Salt Lake Tribune
(Rick Egan | The Salt Lake Tribune) Vehicles wait for the train at 900 West and South Temple on Tuesday, May 26, 2026. Add as Preferred Source Comment Sponsored: How the commitment of of the Wheelwright family has lasted more than a century to serve its community.
Complesso portuale di Cai Mep - Thi Vai: un esempio virtuoso di porti marittimi ecocompatibili nella regione. Vietnam.vn
Gemadept punta a costruire un porto ecocompatibile e un modello logistico a basse emissioni, implementando sistemi come smartPort, smartGate e riverGate, impianti solari sui tetti e veicoli e attrezzature elettriche. La flotta di chiatte elettriche è solo il primo passo di una strategia di sostenibilità ambientale completa, che aiuterà l'azienda a soddisfare gli standard imposti dalle compagnie di navigazione globali.
Secondo la signora Nguyen Thi Thu Thao, responsabile delle pubbliche relazioni e coordinatrice del comitato ESG di Gemadept, l'azienda si sta preparando alla trasformazione verde dal 2023: ha istituito un comitato ESG, misura le emissioni di gas serra secondo gli standard internazionali e si è posta l'obiettivo di applicare i principi ESG in modo sincrono all'intero sistema entro il 2025.
Secondo un annuncio del maggio 2025, Gemadept e CMA CGM hanno ufficialmente costituito una joint venture per gestire la prima flotta di chiatte 100% elettriche in Vietnam. Il percorso operativo di 180 km contribuirà a ridurre le emissioni di CO₂ di 778 tonnellate all'anno: una cifra relativamente bassa a livello globale, ma un primo passo strategicamente significativo in Vietnam, dove il trasporto via acqua dipende ancora in larga misura dai combustibili fossili.
L'introduzione delle chiatte elettriche non solo crea una nuova modalità di trasporto, ma apre anche la strada all'obiettivo di ridurre le emissioni di CO₂ di circa 778 tonnellate all'anno, avvicinandosi agli standard internazionali per la logistica verde. Questo sviluppo dimostra che il settore portuale vietnamita sta entrando in una fase di competizione basata su "standard verdi", in cui le aziende che non si adegueranno saranno escluse dalla catena di approvvigionamento globale.
Se Gemadept è stata una pioniera nel trasporto fluviale pulito, la Saigon Newport Corporation (TCSG) è stata la prima impresa a gettare le basi per il modello di porto verde in Vietnam.
Dal 2009 – un periodo in cui il concetto di "porto verde" era ancora sconosciuto – TCSG ha deciso di sostituire tutte le apparecchiature a diesel con apparecchiature elettriche. Questo è stato un passo fondamentale che ha generato profondi cambiamenti: i costi operativi sono diminuiti da 200 miliardi a 66 miliardi di VND all'anno; il rumore e le emissioni sono stati ridotti; l'efficienza operativa è aumentata; e sono state gettate le basi per l'automazione e la gestione intelligente.
Ad oggi, TCSG trasporta l'80% delle merci tra Cai Mep - Thi Vai e Ho Chi Minh City via chiatta, riducendo la pressione sul trasporto su strada e tagliando centinaia di migliaia di tonnellate di emissioni all'anno.
Il porto internazionale di Tan Cang - Cai Mep viene costruito e gestito secondo un modello portuale "verde".
Contemporaneamente, sono stati installati impianti solari sui tetti degli uffici; le attrezzature di sollevamento e i semirimorchi sono passati gradualmente all'alimentazione elettrica; è stata fornita elettricità da terra alle navi; e il sistema di trattamento dei rifiuti è stato ammodernato. I due porti più grandi di Tan Cang, Cat Lai e Cai Mep, sono stati riconosciuti come porti verdi dalla Comunità Portuale dell'Asia-Pacifico (APSN).
Illustrando la tabella di marcia per la transizione ecologica, il signor Bui Van Quy, vicedirettore generale di TCSG, ha affermato che l'azienda ha implementato la strategia in modo proattivo fin dalle prime fasi, iniziando con l'elettrificazione delle attrezzature, il passo più fattibile e in grado di produrre risultati immediati.
Dalle gru ai carrelli elevatori, fino ai veicoli per le operazioni portuali, tutto viene gradualmente sostituito dal diesel all'elettrico. Allo stesso tempo, il porto di Tan Cang sta installando impianti solari in molti magazzini e uffici per integrare le fonti di energia pulita e ridurre la dipendenza dalla rete elettrica.
Tuttavia, secondo il signor Quy, la transizione energetica è solo una parte della "trasformazione verde". Ancora più importante, le imprese devono cambiare anche i loro metodi di trasporto.
📰 American Journal of Transportation📅 2026-05-27📍 SingaporeenAria · inquinamentoClima · decarbonizzazione
Million-dollar award awaits winner in clean fuel race for ships at the Port of Long Beach American Journal of Transportation
posted by AJOT|May 27 2026at 01:00 PM |Ports & Terminals The Port of Long Beach established an unprecedented $1 million award for the first oceangoing vessel to refill at its harbor with methanol on a commercial scale in an effort to jumpstart the industry’s transition to cleaner, lower-carbon fuels like methanol. Approved Monday by the Long Beach Harbor Commission, the Clean Fuel Bunkering Challenge is expected to send a strong signal to the global market of the interest in expanding the availability of clean marine fuels. “We know the shipping industry is considering moving toward adopting methanol marine fuel for some great reasons – they want to reduce greenhouse gas emissions and improve air quality. Today, we’re giving them 1 million more reasons to embrace clean fuels,” said Port of Long Beach CEO Dr. Noel Hacegaba. “This is about demonstrating that we’re serious about creating a North American market for methanol bunkering, and giving the industry an incentive to invest. We’re also seeing how rising fuel costs are strengthening the case for energy diversification and greater energy independence.” “The Port of Long Beach has been advancing the commercial availability of clean technology and sustainability solutions for decades,” said Long Beach Harbor Commission President Frank Colonna. “This is the most direct and practical lever we can pull to demonstrate the feasibility of bunkering methanol fuel in San Pedro Bay.” When compared to conventional marine fuel, a ship running on methanol emits significantly less pollutants, reducing nitrogen oxide emissions by up to 50%, sulfur oxides by 95% and particulate matter by 90%. Major global shipping companies are heavily investing in dual-fuel methanol vessels, some of which are already visiting Long Beach. However, methanol fuel is not currently available at the Port, necessitating methanol-capable ships to depart using conventional bunker fuel. With current pricing, refueling a vessel with methanol would cost about $1.5 million per call compared to approximately $1 million for conventional fuel. The Port award is intended to offset the difference, and provide another $500,000 toward additional costs including development of operational and safety procedures and working with fuel providers and distributors, as well as local permitting agencies. The Clean Fuel Bunkering Challenge is part of a concerted strategy by the Port of Long Beach to encourage cleaner ships and clean marine fuels, with development informed by discussions with shipping partners about their challenges and interests. It was also inspired by the commercial availability of the fuel at the ports of Shanghai and Singapore, two participants in Green Shipping Corridors with the San Pedro Bay ports. Within the next year, the Port intends to update the Green Ship Incentive Program to encourage more routine cleaner ship visits, which could further boost the methanol market. Pending revisions include updated scoring and incentive metrics, in collaboration with other international ports.
"One Health", la Sicilia prova a cambiare rotta: ad Ustica il piano per porti a impatto zero Il Moderatore
USTICA ONE HEALTH 2026
La quarta edizione di “Ustica One Health 2026”, la Summer School in Biologia Marina Applicata, porta sull’isola scienziati, istituzioni e analisti con un obiettivo molto pratico: capire come bloccare il degrado del mare collegando la salute dell’ecosistema a quella dell’uomo. Quest’anno l’iniziativa – promossa dall’Ordine dei Biologi della Sicilia insieme al Biodiversity Gateway dell’Università di Palermo, all’Area Marina Protetta e al Comune di Ustica – registra una svolta pesante: l’ingresso dei vertici che gestiscono i porti della Sicilia occidentale, pronti a ridisegnare le regole del gioco nelle banchine.
Il porto non è solo cemento: la nuova linea di Annalisa Tardino
Il corridoio logistico e il patrimonio marino non rappresentano più due sfere in conflitto, ma i lati di una stessa medaglia strategica. Lo ha rimarcato con chiarezza Annalisa Tardino, presidente dell’Autorità di Sistema portuale del Mare di Sicilia occidentale, intervenendo nel corso della sessione inaugurale. Secondo la presidente, la sfida moderna dell’ente non si esaurisce nella movimentazione delle merci o nell’accoglienza dei flussi turistici, ma risiede nella capacità di governare una transizione marittima resiliente e integrata con i territori.
“L’approccio di One Health ci ricorda proprio questo: non esiste una salute dell’economia separata dalla salute dell’ambiente e delle persone. Esiste un unico equilibrio da costruire e proteggere. Spesso immaginiamo il porto come un luogo esclusivamente legato alla movimentazione delle merci, ai traffici e alle grandi infrastrutture. In realtà, oggi la vera sfida è un’altra: comprendere come la vita di un porto possa convivere con l’attenzione alla sostenibilità.”
Dall’elettrificazione delle banchine alla tutela delle comunità
La transizione ecologica dei nodi portuali si traduce in interventi strutturali precisi, capaci di superare la vecchia contrapposizione tra profitto e conservazione. Il piano di investimenti tocca l’elettrificazione delle banchine per azzerare le emissioni delle navi in sosta, lo sviluppo di sistemi energetici di nuova generazione e il potenziamento dei sistemi di monitoraggio per la qualità dell’aria e delle acque, oltre all’efficientamento dei collegamenti intermodali.
Tardino ha tuttavia evidenziato che la sostenibilità non possiede soltanto una declinazione ecologica, ma richiede una forte matrice sociale ed economica. L’obiettivo finale consiste nel garantire occupazione e generare valore concreto per la collettività locale, mantenendo un dialogo costante con le amministrazioni cittadine e tutelando le risorse biologiche per le generazioni future.
Un accordo scientifico per blindare le coste siciliane
Dalle intenzioni programmatiche si passa immediatamente ai fatti con la nascita di un asse operativo tra la scienza e la gestione delle infrastrutture marittime. Alessandro Pitruzzella, presidente dell’Ordine dei Biologi di Sicilia, ha annunciato la prossima firma di un protocollo d’intesa con l’Autorità di Sistema portuale della Sicilia occidentale.
“Avvieremo un protocollo d’intesa con l’Autorità di Sistema portuale della Sicilia occidentale per rafforzare delle attività di monitoraggio ambientale, contrasto all’inquinamento e salvaguardia del litorale. Un passo concreto che unisce competenze scientifiche e istituzionali nell’ottica One Health.”
L’accordo strutturato fisserà nuove procedure per il controllo dei fattori inquinanti e la protezione attiva dei tratti costieri adiacenti alle aree industriali e commerciali. Questo legame tra ricerca sul campo e pianificazione portuale trasforma la Summer School di Ustica da momento di studio accademico a vero e proprio laboratorio normativo e gestionale per il futuro del mare siciliano.
Porti, la transizione energetica passa dal cold ironing: Ravenna laboratorio del nuovo hub energetico Adriaeco
Al convegno promosso da ASSOCOSTIERI il confronto tra istituzioni e operatori su governance, autoconsumo e sostenibilità degli investimenti. “Servono regole chiare e modelli replicabili”
La transizione energetica dei porti italiani entra in una nuova fase, nella quale infrastrutture, governance e sostenibilità economica devono procedere insieme. È questo il messaggio emerso dal convegno organizzato a Ravenna da ASSOCOSTIERI insieme all’Autorità di Sistema Portuale del Mare Adriatico Centro Settentrionale nell’ambito del progetto DEPORTIBUS, che ha riunito istituzioni, operatori logistici, consulenti tecnologici e partner industriali attorno a una domanda sempre più centrale per il sistema marittimo nazionale: come rendere realmente sostenibile la decarbonizzazione dei porti.
Al centro del confronto il tema del cold ironing, la tecnologia che consente alle navi ormeggiate di spegnere i motori alimentandosi attraverso la rete elettrica di terra. Una soluzione destinata a diventare uno dei pilastri della strategia europea di riduzione delle emissioni nei porti, ma che richiede un profondo ripensamento del modello energetico portuale.
“Elettrificare le banchine non significa soltanto installare infrastrutture”, ha spiegato Dario Soria, direttore generale di ASSOCOSTIERI. “L’iniziativa è nata per alimentare il confronto sulle soluzioni tecniche, giuridiche e di governance e sui collegamenti necessari per facilitare l’accesso alle giuste tariffe e alla disponibilità di energia rinnovabile in quantità adeguata per il cold ironing”.
Il tema energetico, infatti, non riguarda soltanto la disponibilità di elettricità, ma investe la competitività stessa dei sistemi portuali. Durante i lavori è emerso come la domanda energetica sia destinata ad aumentare rapidamente, rendendo prioritario ridurre l’esposizione ai costi dell’energia attraverso sistemi di accumulo, modelli di autoconsumo e piattaforme di gestione intelligente dei flussi energetici.
In questo scenario acquistano un ruolo crescente le integrazioni tra impianti fotovoltaici, comunità energetiche e sistemi di flessibilità, elementi considerati ormai indispensabili per garantire sostenibilità economica e finanziaria agli investimenti necessari per la decarbonizzazione delle infrastrutture portuali.
L’evoluzione in corso trasforma progressivamente il porto in un hub energetico multicommodity, nel quale infrastrutture energetiche, digitale e governance devono operare come un ecosistema integrato. Una trasformazione che, secondo gli operatori del settore, richiede modelli replicabili e un quadro regolatorio stabile, destinando alle Autorità di Sistema Portuale un ruolo sempre più strategico nella pianificazione energetica dei territori logistici.
Tra i casi più avanzati emersi durante il convegno figura proprio il porto di Ravenna, indicato come uno dei principali laboratori italiani per la sperimentazione di modelli integrati di produzione, accumulo e gestione dell’energia applicati al cold ironing.
“Nel porto di Ravenna stiamo portando avanti due importanti progetti finanziati con risorse del PNRR”, ha ricordato Francesco Benevolo, presidente dell’Autorità di Sistema Portuale del Mare Adriatico Centro Settentrionale. “Abbiamo già completato un campo fotovoltaico da 37 giga finanziato dal Ministero dell’Ambiente e della Sicurezza Energetica, mentre con il Ministero delle Infrastrutture e dei Trasporti stiamo realizzando gli impianti di cold ironing al terminal crociere e la relativa rete di collegamento”.
Il progetto ravennate rappresenta così uno dei tasselli più avanzati della strategia italiana di elettrificazione dei porti, in una fase in cui la competitività della logistica marittima europea si giocherà sempre più sulla capacità di integrare sostenibilità ambientale, efficienza energetica e innovazione industriale.
Porthos: il progetto di Air Liquide per catturare la CO2 nell’area industriale del porto di Rotterdam Econote
Nel porto di Rotterdam,il più grande polo industriale d’Europa, è in corso un importante progetto incentratosulla cattura e il sequestro dell’anidride carbonica. Si chiama Porthos e nasce con l’obiettivo di favorire ladecarbonizzazionedelle attività industriali dell’area, che attualmente genera circa il 15% delle emissioni complessive di CO₂ dei Paesi Bassi. Il progetto prevede la realizzazione di unarete dedicata al sequestro, trasporto e stoccaggio permanente dell’anidride carbonicaprodotta dagli impianti industriali dell’area. La CO₂ catturata verrà convogliata tramite tubazioni che attraverseranno il porto e trasportata verso giacimenti di gas esauriti nel Mare del Nord. L’infrastruttura sviluppata nell’ambito di Porthos comprenderà una rete di trasporto della CO₂, un terminale di compressione e una piattaforma offshore collegata ai siti di stoccaggio. Una volta operativo, il sistema consentirà di catturare e sequestrare fino a 2,5 milioni di tonnellate di CO₂ all’anno. Su un orizzonte di 15 anni, il progetto permetterà di stoccare circa 37 milioni di tonnellate di anidride carbonica, contribuendo in modo significativo alla riduzione delle emissioni industriali del porto. Air Liquidesvolge un ruolo centrale nello sviluppo del progetto grazie alla sua tecnologia proprietaria per la cattura dell’anidride carbonica. Il Gruppo sta infatti realizzando un’unitàCryocap™, questo il nome della tecnologia, presso il proprio sito di Rozenburg, così da catturare le emissioni generate dalla produzione di idrogeno tramite reforming del gas naturale. La CO₂ catturata verrà successivamente trasportata e stoccata attraverso l’infrastruttura di Porthos, mentrel’idrogeno a basso tenore di carbonio prodotto potrà essere fornito ad altre aziende. Un altro punto di forza del progetto risiede nel fatto che l’infrastruttura è stata progettata per evolvere nel tempo: la rete potrà arrivare a trasportare fino a 10 milioni di tonnellate di CO₂ all’anno, aprendo la strada alla creazione di una rete di CCS integrata nel Nord Europa. Vice-presidente dell'associazione culturale, scrive su Econote.it dal 2008. Giornalista e social media manager, crede nelle potenzialità della rete e in un mondo migliore, e nel suo piccolo si impegna ogni giorno per renderlo tale. A ROMA DOMANI AL VIA IL FORUM COMPRAVERDE: GLI STATI GENERALI DELLE POLITICHE E… GIORNATA MONDIALE DELLA BIODIVERSITÀ 2026: Nella Tenuta di Acqua Panna Sanpellegrino ha… Le associazioni Fiab Caserta in Bici e Napoli Cicloverdi, con Il Giardino Segreto di Roccaromana… A ROMA DOMANI AL VIA IL FORUM COMPRAVERDE: GLI STATI GENERALI DELLE POLITICHE E… Tutto quello che c'è da sapere per smaltirli correttamente — e magari dargli una seconda… Milano è una città dinamica, vivace e sempre in movimento, ma anche chi vive nel… Anatomia di una confessione necessaria: il nuovo libro Neo Edizioni C’è un momento, durante la… GIORNATA MONDIALE DELLA BIODIVERSITÀ 2026: Nella Tenuta di Acqua Panna Sanpellegrino ha…
May 26, 2026 Credit: Christian Badenfelt Grimaldi has christened its latest ammonia-ready PCTC Grande Svezia at the port of Wallhamn, Sweden. With her name, the Grande Svezia pays tribute to a country that has been regularly served by Grimaldi vessels for more than 30 years. Furthermore, the port of Wallhamn, chosen for the christening ceremony, is Sweden’s only private port and is managed by the Italian shipping group. The port is part of the Grimaldi Group’s EuroMed service, on which the Grande Svezia operates, regularly connecting the main ports of the Mediterranean and Northern Europe, with calls in Italy, Spain, Greece, Turkey, Egypt, Cyprus, Morocco, Portugal, the United Kingdom, Denmark, Sweden, Belgium, the Netherlands and Germany. Built by China Merchants Heavy Industries Jiangsu shipyard, the Grande Svezia is 220 metres long and 38 metres wide, with a gross tonnage of 91,611 and a service speed of 18 knots. Across her 14 decks, she can transport both electric and conventionally powered vehicles, with a maximum capacity of 9,000 CEU. She is one of the ammonia-ready PCTCs in the Grimaldi Group fleet, which currently includes 11 vessels and will be further expanded with the delivery of six additional units by 2027. To achieve zero emissions while in port, the vessel is equipped with mega lithium batteries with a total capacity of 5MWh, as well as cold ironing capability, allowing her to draw electricity directly from shore where facilities are available. Additional sustainability features include 2,500 square metres of solar panels, silicon-based hull coatings to reduce resistance, smart systems for optimizing ventilation and air conditioning, and advanced exhaust gas cleaning systems that significantly reduce SOx, NOx and particulate emissions. An Air Lubrication system, an optimized hull design and an innovative gate rudder further enhance propulsion efficiency and manoeuvrability. Compared with previous generations of car carriers, this vessel enables fuel consumption reductions of up to 50%.
📰 The Manufacturer📅 2026-05-27📍 LiverpoolenAria · inquinamentoClima · decarbonizzazione
Unilever completes investment at Port Sunlight site The Manufacturer
Unileverhas announced the completion of a £150m investment in its Port Sunlight site, home to brands including Persil, Comfort, Cif, TRESemmé and Lynx body wash. The investment includes manufacturing upgrades across its home care operations and a new advanced automated distribution centre, which will strengthen Unilever’s UK supply chain, from manufacturing through to delivery to retail customers. The investment includes high-tech manufacturing upgrades in the site’s Home Care factory, which makes the Persil, Surf and Comfort laundry brands, and a new advanced automated distribution centre, directly connected to Port Sunlight’s three factories. Together, these investments will support the next generation of Persil laundry capsules and strengthen Unilever’s UK supply chain, from manufacturing through to delivery to retail customers. At Unilever’s laundry capsule facility, new technology will increase laundry capsule production three fold while enabling the manufacture of smaller, more complex capsule formats. This supports thelaunch of Persil’s new advanced four-chamber capsules which feature new powerful cleaning technologies. This is a landmark moment for Port Sunlight. The completion of investments in Home Care manufacturing and the opening of a new flagship distribution centre will support the growth of our business and reinforce Port Sunlight’s role as a strategic hub for our UK and European operations.Marc Woodward, Head, Unilever UK A new distribution centre also connects directly to the factories on-site and will reduce the requirement for lorries to move goods between the factories and distribution centres in other locations, delivering sustainability and safety benefits. By taking hundreds of lorries off the road each week, it will deliver a significant estimated 27% reduction in primary logistics. By taking hundreds of lorries off the road each week, it will deliver a significant estimated 27% reduction in primary logistics – the lorries that transport Unilever products from factory to warehouse – saving an associated 827 tonnes of CO₂ emissions. It is powered by 100% renewable energy, with solar panels, heat pumps and solar reflectance painting. Founded in 1888 by William Lever, Port Sunlight remains a key UK hub for Unilever, combining advanced manufacturing and R&D, with around 2,000 employees across the site. Steve Rotheram, Mayor of the Liverpool City Region, said: “Our region has a proud industrial heritage, and Unilever has been part of that story for generations – supporting thousands of jobs and helping to put the Liverpool City Region on the map as a centre for manufacturing and innovation. “This investment is a strong vote of confidence in our region as a place where global businesses can grow, innovate and create opportunity. It will help support high-quality jobs, apprenticeships and skills for local people, while strengthening our position as a leader in advanced manufacturing and R&D. “Just as importantly, this new facility shows how economic growth and sustainability can go hand in hand. By cutting hundreds of lorry journeys from our roads each week, Unilever is supporting our target to reach net zero by 2035, improve air quality for local people, and support ambitions for a cleaner, greener city region.” For more articles like this, visit ourLeadershipchannel
La britannica ELIRE Maritime testa una ‘centrale elettrica’ galleggiante a idrogeno come alternativa al cold ironing nei porti HydroNews
Trasporto
Uno dei principali capitoli che compongono l’ampio dossier sulla decarbonizzazione dello shipping, riguarda il tema dell’abbattimento delle emissioni delle navi quando sostano in porto. La soluzione di elettrificare le banchine, il cosiddetto cold ironing, si rivela in molti casi complessa da mettere a terra per via di problemi sia di natura burocratica che infrastrutturale, oltre che di scarsa chiarezza su chi debba gestire il servizio e su come renderlo economicamente sostenibile.
Un’alternativa a questo sistema potrebbe arrivare dal Regno Unito, dove la società londinese ELIRE Maritime ha annunciato il completamento del programma CMDC6 (Clean Maritime Demonstrator Competition Round 6). Progetto finanziato con un milione di sterline dall’UK Research and Innovation – ente pubblico britannico istituito per accompagnare sviluppo e ricerca scientifica – e portato avanti in team con Ricardo UK, Schneider Electric, Rux Energy UK, Triton Anchor Europe, OREC (Offshore Renewable Energy Catapult) e l’Università scozzese di Strathclyde, per validare un modello di quella che può essere definita una centrale elettrica galleggiante a idrogeno. La ratio, sostanzialmente, sarebbe questa: invece di aspettare anni per potenziare la rete terrestre e realizzare nuove infrastrutture, l’energia verrebbe prodotta, accumulata e gestita direttamente in mare attraverso una piattaforma galleggiante modulare alimentata ad H 2 .
In pratica, il sistema sviluppato combina fuel cell, batterie e stoccaggio di idrogeno all’interno di una struttura galleggiante in grado di fornire elettricità direttamente alle navi in banchina, consentendo loro di spegnere i motori durante la sosta in porto.
Secondo quanto comunicato attraverso una nota, il prototipo sviluppato è capace di erogare fino a 5 MW continui di potenza, sufficienti ad alimentare navi da crociera di medie dimensioni e unità di altre tipologie di stazza paragonabile. Dal punto di vista tecnico, l’hub è formato da 3 piattaforme galleggianti modulari a geometria esagonale, per una superficie complessiva di circa 1.200 metri quadrati. A bordo trovano posto batterie per circa 45 MWh di capacità di accumulo, celle a combustibile modulari da 1,3 MW e pannelli fotovoltaici per la produzione di energia rinnovabile.
Il principio di funzionamento è quello di una grande batteria galleggiante. Le celle a combustibile alimentate a idrogeno lavorano durante la settimana per caricare progressivamente gli accumulatori di bordo; quando la nave arriva in banchina, l’energia immagazzinata viene erogata rapidamente per alimentarla durante la sosta. Per farlo, la piattaforma consuma circa 7.500-8.000 kg di idrogeno a settimana, conservati in container modulari a bassa pressione, compatibili con gli standard ISO e integrati direttamente nella struttura galleggiante.
Archiviati questi aspetti, la stessa società britannica nella nota non nasconde che il tema legato ai costi relativi all’energia prodotta dal prototipo è concreto e, attualmente, non aggirabile. Il differenziale con il diesel (combustibile marino più diffuso) e con il cold ironing sarebbe notevole: 0,25 e 0,50 sterline/kWh, contro gli 0,15-0,25 sterline/kWh. La competitività della soluzione sarebbe, dunque, quella di portare rapidamente elettricità pulita alle navi anche nei porti dove la rete terrestre non ha potenza sufficiente o richiederebbe anni di lavori prima di poter alimentare grandi unità in banchina.
“Nei porti non serve soltanto energia a costi più bassi: servono infrastrutture energetiche che possano essere realizzate davvero. Non si tratta di sostituire la rete elettrica, ma di portare energia pulita dove la rete non è in grado di arrivare”, ha sintetizzato Luke Jenkinson, fondatore e CEO di ELIRE Maritime.
L’unità sarà impiegata su itinerari nel Mediterraneo e nel Nord Europa L'articolo Fincantieri, consegnata ad Ancona la nave ‘Viking Mira’ proviene da Shipmag .
L’unità sarà impiegata su itinerari nel Mediterraneo e nel Nord Europa
Ancona – Fincantieri e Viking hanno celebrato, presso lo stabilimento di Ancona, la consegna di “Viking Mira”. Alla cerimonia hanno presenziato Jeff Dash, executive vice president and head of business development Viking, Giorgio Gomiero,senior vice president operations Fincantieri e Gilberto Tobaldi, direttore dello stabilimento di Ancona.
Con una stazza lorda di circa 54.300 tonnellate, “Viking Mira” dispone di 499 cabine e può accogliere fino a 998 passeggeri. L’unità, che sarà impiegata su itinerari nel Mediterraneo e nel Nord Europa, appartiene al segmento delle navi da crociera di piccole dimensioni e fa parte della flotta delle navi da crociera Viking tutte costruite da Fincantieri.
Tutte le unità Viking sono progettate e costruite nel rispetto delle più recenti normative internazionali in materia di sicurezza e navigazione e sono equipaggiate con soluzioni tecnologiche avanzate e motorizzazioni ad alta efficienza, finalizzate alla riduzione delle emissioni e al contenimento dell’impatto ambientale, in linea con i più alti standard del settore.
La collaborazione tra Fincantieri e Viking, iniziata nel 2012, prosegue nel quadro di una solida partnership nel settore crocieristico. Considerando le navi già ordinate, i contratti firmati e le opzioni concordate negli ultimi mesi, la cui efficacia resta subordinata alle consuete condizioni di finanziamento richieste dal mercato, il portafoglio complessivo tra i due gruppi conta ora le 26 unità.
Lo scorso marzo è stato annunciato un nuovo ordine per la costruzione di due navi da crociera expedition, con consegna prevista nel 2030 e nel 2031, oltre a un’opzione per due ulteriori unità oceaniche con consegna stimata nel 2034, segnando una nuova fase di sviluppo della collaborazione tra i due gruppi.
Il cantiere di Ancona rappresenta uno dei principali poli produttivi del gruppo. Negli ultimi anni il sito è stato oggetto di un articolato programma di sviluppo volto a rafforzarne la competitività, attraverso interventi infrastrutturali, tecnologici e logistici sostenuti congiuntamente dall’azienda e dal sistema portuale pubblico. Con un’area di 360.000 m², con una capacità produttiva di 60.000 TSL, sistemi di sollevamento fino a 500 tonnellate e potenzialità scafo di 1.200 tonnellate al mese. Dal 2009, sono già state consegnate oltre 20 navi, grazie all’impegno quotidiano di circa 3.700 lavoratori, provenienti da diverse nazionalità, esperienze e generazioni. Il cantiere è parte attiva del programma Operations Excellence, che prevede l’introduzione di tecnologie avanzate, robotica e IA per incrementare l’efficienza e migliorare la qualità del lavoro.
Presentata ai clienti e partner svedesi una delle nuovissime car carrier ammonia ready, parte della flotta sempre più green del gruppo dedicata al trasporto di veicoli L'articolo Grimaldi battezza a Wallhamn in Svezia la car carrier ‘Grande Svezia’ proviene da Shipmag .
Presentata ai clienti e partner svedesi una delle nuovissime unità ammonia ready, parte della flotta sempre più green del gruppo dedicata al trasporto di veicoli
Napoli – Si è tenuta ieri, presso il porto di Wallhamn (Svezia), la cerimonia di battesimo della nave Grande Svezia. Presa in consegna a dicembre 2025, l’unità ha ampliato la flotta di Pctc (Pure Car & Truck Carrier) ammonia ready del gruppo Grimaldi: navi di ultima generazione predisposte per il futuro utilizzo dell’ammoniaca come carburante alternativo a zero emissioni di carbonio.
Con il suo nome, la Grande Svezia rende omaggio ad un Paese servito regolarmente dalle navi Grimaldi da oltre trent’anni. Inoltre, il porto di Wallhamn, scelto per la cerimonia di battesimo, è l’unico porto privato della nazione, ed è gestito proprio dal gruppo armatoriale partenopeo. Lo scalo è parte dello storico servizio EuroMed del Gruppo Grimaldi, sul quale è impiegata la Grande Svezia, che collega regolarmente i principali porti del Mediterraneo e del Nord Europa, con scali in Italia, Spagna, Grecia, Turchia, Egitto, Cipro, Marocco, Portogallo, Regno Unito, Danimarca, Svezia, Belgio, Paesi Bassi e Germania.
All’evento hanno partecipato diversi rappresentanti di clienti e partner svedesi di lunga data del gruppo Grimaldi, tra cui importanti produttori di veicoli come Volvo Cars e Volvo Trucks, che hanno potuto visitare le principali aree della nave accompagnati dal Comandante e dall’equipaggio. La cerimonia di battesimo si è aperta con i saluti di Sven-Göran Sjöström, Amministratore Delegato di Grimaldi Maritime Agencies Sweden, e di Costantino Baldissara, Automotive Atlantic Director del Gruppo Grimaldi.
Dopo il rito della benedizione della nave, a tagliare il nastro per la tradizionale rottura della bottiglia è stata la madrina della Grande Svezia Francesca Gamboni, chief industrial operations officer di Volvo Cars.
Costruita dal cantiere China Merchants Heavy Industries Jiangsu, la Grande Svezia è lunga 220 metri e larga 38 metri, ha una stazza lorda di 91.611 tonnellate ed una velocità di crociera di 18 nodi. Sui suoi 14 ponti può trasportare sia veicoli elettrici che quelli alimentati da combustibili fossili, per una capacità massima di 9.000 ceu (Car Equivalent Units).
All’elevata capacità si affiancano le numerose tecnologie green: la Grande Svezia è una delle unità Pctc ammonia ready della flotta del gruppo Grimaldi, che oggi conta ben 11 navi, e sarà ulteriormente ampliata con l’arrivo di altre sei unità entro il 2027.
Per azzerare le emissioni durante le soste in porto, la nave è dotata di mega batterie al litio dalla capacità totale di 5 MWh, e di un sistema che le consente di ricevere energia elettrica da terra durante le soste in porto (cold ironing) negli scali dotati dell’infrastruttura necessaria. Tra le ulteriori caratteristiche di sostenibilità figurano 2.500 metri quadrati di pannelli solari, rivestimenti dello scafo a base siliconica per ridurre l’attrito, sistemi smart di controllo della ventilazione e dell’aria condizionata e tecnologie avanzate per il trattamento dei gas di scarico che riducono significativamente le emissioni di SOx, NOx e particolato.
Un sistema di Air Lubrication, un design ottimizzato dello scafo e un innovativo timone denominato gate rudder migliorano ulteriormente l’efficienza propulsiva e la manovrabilità. Rispetto alle precedenti generazioni di car carrier, questa nave consente una riduzione del consumo di carburante fino al 50%.
Tenuta a battesimo la nuova nave Grande Svezia di Grimaldi Shipping Italy
Si è tenuta nel porto di Wallhamn (Svezia) la cerimonia di battesimo della nave Grande Svezia.
Presa in consegna a dicembre 2025, l’unità ha ampliato la flotta di Pctc (Pure Car & Truck Carrier) ammonia ready del Gruppo Grimaldi: navi di ultima generazione predisposte per il futuro utilizzo dell’ammoniaca come carburante alternativo a zero emissioni di carbonio.
Il porto di Wallhamn è l’unico porto privato della nazione, ed è gestito proprio dal gruppo armatoriale partenopeo. Lo scalo è parte dello storico servizio EuroMed del Gruppo Grimaldi, sul quale è impiegata la Grande Svezia, che collega regolarmente i principali porti del Mediterraneo e del Nord Europa, con scali in Italia, Spagna, Grecia, Turchia, Egitto, Cipro, Marocco, Portogallo, Regno Unito, Danimarca, Svezia, Belgio, Paesi Bassi e Germania.
All’evento hanno partecipato diversi rappresentanti di clienti e partner svedesi di lunga data del Gruppo Grimaldi, tra cui importanti produttori di veicoli come Volvo Cars e Volvo Trucks, che hanno potuto visitare le principali aree della nave accompagnati dal Comandante e dall’equipaggio. La cerimonia di battesimo si è aperta con i saluti di Sven-Göran Sjöström, Amministratore Delegato di Grimaldi Maritime Agencies Sweden, e di Costantino Baldissara, Automotive Atlantic Director del Gruppo Grimaldi.
Dopo il rito della benedizione della nave, a tagliare il nastro per la tradizionale rottura della bottiglia è stata la madrina della Grande Svezia Francesca Gamboni, Chief Industrial Operations Officer di Volvo Cars.
Costruita dal cantiere China Merchants Heavy Industries Jiangsu, la Grande Svezia è lunga 220 metri e larga 38 metri, ha una stazza lorda di 91.611 tonnellate ed una velocità di crociera di 18 nodi. Sui suoi 14 ponti può trasportare sia veicoli elettrici che quelli alimentati da combustibili fossili, per una capacità massima di 9.000 Ceu.
All’elevata capacità si affiancano le numerose tecnologie green: la Grande Svezia è una delle unità Pctc ammonia ready della flotta del Gruppo Grimaldi, che oggi conta ben 11 navi, e sarà ulteriormente ampliata con l’arrivo di altre sei unità entro il 2027. Per azzerare le emissioni durante le soste in porto, la nave è dotata di mega batterie al litio dalla capacità totale di 5 MWh, e di un sistema che le consente di ricevere energia elettrica da terra durante le soste in porto (cold ironing) negli scali dotati dell’infrastruttura necessaria.
ISCRIVITI ALLA NEWSLETTER QUOTIDIANA GRATUITA DI SHIPPING ITALY
SHIPPING ITALY E’ ANCHE SU WHATSAPP: BASTA CLICCARE QUI PER ISCRIVERSI AL CANALE ED ESSERE SEMPRE AGGIORNATI
Grazie a un’autonomia fino a 8.700 chilometri con un carico utile massimo di 111 tonnellate, consentirà agli operatori di impiegarlo sulle rotte internazionali a lungo raggio. L'articolo Air China Cargo porta a 10 aeromobili l’ordine di cargo A350F proviene da Shipmag .
Grazie a un’autonomia fino a 8.700 chilometri con un carico utile massimo di 111 tonnellate, consentirà agli operatori di impiegarlo sulle rotte internazionali a lungo raggio
Tolosa – Air China Cargo ha firmato un contratto di acquisto con Airbus per quattro ulteriori cargo A350F, portando così a 10 aeromobili il proprio ordine complessivo per questo modello. Air China Cargo aveva precedentemente ordinato sei cargo A350F nel novembre 2025.
“Questo ordine aggiuntivo, che segue il nostro primo ordine di A350F dello scorso anno, rappresenta una decisione strategica fondamentale per ottimizzare ulteriormente la struttura della nostra flotta ed espandere la capacità di trasporto. Ci consentirà di rispondere in modo ancora più efficace alla domanda del mercato internazionale del trasporto aereo merci, ponendo solide basi per lo sviluppo stabile e di lungo periodo della società”, ha dichiarato Wang Hongyan, vicepresidente di Air China Cargo.
“Siamo molto lieti della decisione di Air China Cargo di incrementare il proprio ordine di cargo A350F. Questa scelta riflette la piena fiducia di Air China Cargo nei prodotti Airbus e conferma la posizione di leadership dell’A350F come cargo di nuova generazione”, ha dichiarato Benoît de Saint-Exupéry, EVP Sales Commercial Aircraft di Airbus.
Air China Cargo ha iniziato a introdurre cargo Airbus nella propria flotta alla fine del 2023 e attualmente opera una flotta di otto aeromobili Airbus A330-200P2F. Nel prossimo futuro, il cargo A350F entrerà a far parte della flotta di Air China Cargo, integrandosi con gli A330-200P2F e massimizzandone i vantaggi sulle rotte a lungo raggio e medio-lungo raggio.
Progettato per essere il cargo più avanzato al mondo, l’A350F risponde all’evoluzione delle esigenze del mercato globale del trasporto aereo merci. Grazie a un’autonomia fino a 8.700 chilometri con un carico utile massimo di 111 tonnellate, consentirà agli operatori di impiegarlo sulle rotte internazionali a lungo raggio. Realizzato per oltre il 70% con materiali avanzati, l’A350F è più leggero di 46 tonnellate rispetto agli aeromobili concorrenti.
Equipaggiato con i più recenti motori Rolls-Royce Trent XWB-97, l’aeromobile consentirà una riduzione fino al 20% del consumo di carburante e delle emissioni di carbonio rispetto agli aeromobili della generazione precedente con analoghe capacità di carico utile e autonomia. È inoltre l’unico cargo pienamente conforme agli standard Icao sulle emissioni di CO₂ previsti per il 2027. L’A350F sarà in grado di operare con una miscela fino al 50% di Sustainable Aviation Fuel (Saf) al momento dell’entrata in servizio, con l’obiettivo di estendere questa capacità fino al 100% entro il 2030, come previsto per tutti gli aeromobili Airbus.
Gruppo Grimaldi, battezzata a Wallhamn la "Grande Svezia", nuova car carrier ammonia ready Corriere Marittimo
NAPOLI – Si è svolta ieri nel porto di Wallhamn, in Svezia, la cerimonia di battesimo della Grande Svezia, nuova unità del Gruppo Grimaldi entrata in flotta lo scorso dicembre 2025. La nave va ad ampliare il parco PCTC (Pure Car & Truck Carrier) ammonia ready del gruppo armatoriale partenopeo, composto da unità di ultima generazione predisposte per il futuro utilizzo dell’ammoniaca come carburante alternativo a zero emissioni di carbonio.
Il nome scelto per la nave rappresenta un omaggio alla Svezia, Paese collegato regolarmente dai servizi Grimaldi da oltre trent’anni. Anche la scelta di Wallhamn come sede della cerimonia assume un significato particolare: lo scalo, infatti, è l’unico porto privato svedese ed è gestito dal Gruppo Grimaldi.
Il porto rientra inoltre nel network dello storico servizio EuroMed, sul quale opera la Grande Svezia, che collega i principali porti del Mediterraneo e del Nord Europa con scali in Italia, Spagna, Grecia, Turchia, Egitto, Cipro, Marocco, Portogallo, Regno Unito, Danimarca, Svezia, Belgio, Paesi Bassi e Germania.
Alla cerimonia hanno preso parte rappresentanti di clienti e partner storici del Gruppo Grimaldi in Svezia, tra cui importanti case automobilistiche come Volvo Cars e Volvo Trucks. Gli ospiti hanno avuto l’opportunità di visitare le principali aree della nave accompagnati dal comandante e dall’equipaggio.
L’evento si è aperto con gli interventi di Sven-Göran Sjöström, amministratore delegato di Grimaldi Maritime Agencies Sweden, e di Costantino Baldissara, Automotive Atlantic Director del Gruppo Grimaldi. Dopo la benedizione della nave, la tradizionale rottura della bottiglia è stata affidata alla madrina: Francesca Gamboni, Chief Industrial Operations Officer di Volvo Cars.
Realizzata dal cantiere China Merchants Heavy Industries Jiangsu, la nave misura 220 metri di lunghezza e 38 metri di larghezza, con una stazza lorda di 91.611 tonnellate e una velocità di crociera di 18 nodi. I suoi 14 ponti consentono il trasporto sia di veicoli elettrici sia di mezzi alimentati da carburanti tradizionali, per una capacità complessiva di 9.000 CEU (Car Equivalent Units).
La Grande Svezia si distingue anche per le sue avanzate soluzioni ambientali. L’unità fa parte della flotta PCTC ammonia ready del Gruppo Grimaldi, che attualmente conta undici navi e sarà ulteriormente ampliata con l’arrivo di altre sei unità entro il 2027.
Per ridurre le emissioni durante la permanenza in porto, la nave è equipaggiata con mega batterie al litio da 5 MWh complessivi e con un sistema di cold ironing che consente di ricevere energia elettrica da terra negli scali attrezzati.
Tra le tecnologie adottate figurano inoltre 2.500 metri quadrati di pannelli solari, rivestimenti siliconici dello scafo per limitare l’attrito, sistemi intelligenti per la gestione della ventilazione e dell’aria condizionata e avanzati impianti di trattamento dei gas di scarico in grado di ridurre sensibilmente le emissioni di SOx, NOx e particolato.
La nave dispone anche di un sistema di Air Lubrication, di uno scafo ottimizzato dal punto di vista idrodinamico e di un innovativo timone gate rudder, soluzioni che contribuiscono a migliorare efficienza propulsiva e manovrabilità.
Grazie a queste tecnologie, la Grande Svezia consente una riduzione del consumo di carburante fino al 50% rispetto alle precedenti generazioni di car carrier.
📰 la RepubblicaMedia📅 2026-05-26📍 GenovaitAria · inquinamentoClima · decarbonizzazione
Axpo realizza a Napoli il primo bunkeraggio Gnl in Italia per una nave cruise la Repubblica
Il porto di Napoli entra ufficialmente nella mappa mediterranea del bunkeraggio Gnl. Axpo Italia, società del gruppo energetico svizzero Axpo, ha infatti realizzato il primo rifornimento ship-to-ship di gas naturale liquefatto destinato a una nave da crociera nello scalo partenopeo, la Sun Princess del gruppo Carnival, segnando un nuovo passo nello sviluppo delle infrastrutture italiane dedicate ai combustibili alternativi per il trasporto marittimo.
L’operazione è stata effettuata domenica 24 maggio presso la Stazione Marittima di Napoli attraverso la bettolina Green Zeebrugge, già utilizzata da Axpo nelle attività di bunkeraggio avviate a Genova alla fine del 2025. Il progetto è stato sviluppato insieme alla Capitaneria di Porto di Napoli, all’Autorità di Sistema Portuale del Mar Tirreno Centrale e a Terminal Napoli Spa, che hanno coordinato l’intero iter autorizzativo e operativo.
L’iniziativa si inserisce in un contesto europeo in cui il Gnl continua a rafforzare il proprio ruolo nella sicurezza energetica e nella transizione del settore shipping. Secondo il report Acer “Analysis of the European LNG market developments – 2026 Monitoring Report”, nel 2025 l’Unione europea ha importato 146 miliardi di metri cubi di Gnl. L’Italia ha registrato una delle crescite più marcate: 20,6 miliardi di metri cubi importati, sei miliardi in più rispetto al 2024, risultando il secondo Paese europeo per incremento delle importazioni dopo il Belgio.
Sul fronte ambientale, il bunkeraggio Gnl viene considerato una delle soluzioni immediatamente disponibili per ridurre l’intensità emissiva del trasporto marittimo e accompagnare gli obiettivi del regolamento FuelEU Maritime, che punta a tagliare dell’80% le emissioni entro il 2050 rispetto ai livelli del 2020. In questo scenario, lo sviluppo di infrastrutture dedicate nei porti italiani viene considerato strategico per sostenere la trasformazione del settore logistico e crocieristico.
Per Axpo Italia, Napoli rappresenta un tassello della strategia di crescita nel segmento Small Scale Lng e Bio-Lng tra Italia e Spagna. La società sta infatti sviluppando una filiera dedicata ai combustibili a basse emissioni per shipping e trasporto pesante, che comprende anche la nave Green Pearl da 7.500 metri cubi e la nuova Alisos Lng da 12.500 metri cubi entrata in attività in Spagna nel marzo scorso.
“Si tratta di un traguardo di assoluto rilievo per il porto di Napoli”, ha dichiarato l’ammiraglio Giuseppe Aulicino, direttore marittimo della Campania e Comandante del porto, sottolineando come lo scalo si affianchi ora “a quelle poche realtà portuali del Mediterraneo dove già si effettuano operazioni di rifornimento di Gnl”. Secondo Simone Demarchi, ad di Axpo Italia, il comparto crocieristico e dello shipping “sarà chiamato nei prossimi anni ad accelerare il proprio percorso di decarbonizzazione” e il Gnl rappresenta oggi “una delle soluzioni più concrete e immediatamente disponibili”.
Per Carnival Corporation, il bunkeraggio di Napoli rappresenta “un progresso importante” nell’espansione del Gnl nella flotta crocieristica del gruppo. “Ampliare l’accesso ai carburanti alternativi nei principali porti è essenziale per supportare i nostri obiettivi di riduzione delle emissioni”, ha affermato John Haeflinger, senior vice president maritime policy and analysis della compagnia.
Crociere “green” in centro a Trieste: banchine pronte, ma manca ancora il via libera da Roma triestenews
26 maggio 2026 – ore 15:30 – Conclusa a Trieste l’elettrificazione delle banchine destinate alle navi da crociera. Il collaudo tecnico delle opere sarà effettuato entro giugno, mentre i primi allacciamenti delle imbarcazioni alla rete elettrica potrebbero avvenire già a luglio. «Faremo il collaudo entro giugno. Adesso stiamo aspettando un decreto del Mit per definire le modalità operative e identificare chi si occuperà di questa operazione. Intanto noi abbiamo completato tutto», ha dichiarato Marco Consalvo, presidente dell’Autorità di Sistema Portuale del Mare Adriatico Orientale e presidente di Trieste Terminal Passeggeri. L’intervento riguarda le banchine lungo le Rive di Trieste, nel centro cittadino, dove attraccano le numerose navi da crociera in sosta nel capoluogo giuliano. L’elettrificazione consentirà alle imbarcazioni di spegnere i motori durante la permanenza in porto, riducendo emissioni e impatto ambientale. Quanto ai tempi di avvio del servizio, Consalvo ha auspicato che «le prime navi possano allacciarsi alla rete già dal prossimo mese di luglio».
Articolo di Francesco Viviani
Porti e transizione energetica, Assiterminal al TEF 2026: “Il cold ironing va trasformato in infrastruttura concreta” Adriaeco
Al Taranto Eco Forum il focus sulla decarbonizzazione dei terminal portuali. Walter Cardaci: servono modelli operativi, semplificazione e reti energetiche integrate per sostenere competitività e sostenibilità
La transizione energetica dei porti passa dalla capacità di trasformare gli obiettivi ambientali in infrastrutture operative e sostenibili sul piano industriale. È il messaggio portato da Assiterminal al TEF – Taranto Eco Forum 2026, dove il 21 maggio Walter Cardaci, presidente della Commissione Energy dell’associazione, è intervenuto sul tema della decarbonizzazione dei terminal portuali, con un focus sul cold ironing e sul suo impatto economico e sociale.
Nel corso dell’incontro, Cardaci ha evidenziato come il cold ironing rappresenti, almeno sul piano teorico, uno degli strumenti più concreti della transizione green del trasporto marittimo. La tecnologia consente infatti alle navi ormeggiate in porto di collegarsi alla rete elettrica di terra, spegnendo i motori ausiliari e riducendo così emissioni atmosferiche, rumore e impatti ambientali nelle aree portuali e urbane.
Secondo Assiterminal, tuttavia, la sfida si gioca ora sulla capacità di rendere questi progetti realmente operativi. «È necessario un approccio pragmatico», ha sottolineato Cardaci, evidenziando come modelli operativi, linee guida e strumenti di sostegno alla competitività debbano tradursi rapidamente in realizzazioni effettive.
Il tema riguarda non soltanto la sostenibilità ambientale, ma anche il posizionamento competitivo della portualità italiana nel nuovo scenario energetico europeo. L’efficienza dei sistemi portuali — è stato sottolineato durante il forum — si misura sempre più sulla qualità della connessione tra mare e terra, sulla capacità di semplificare i processi autorizzativi e operativi e sulla disponibilità di combustibili alternativi competitivi e facilmente reperibili.
Nel ragionamento sviluppato da Assiterminal, la transizione energetica dei porti richiede inoltre una crescente capacità degli operatori di fare rete, condividendo produzione e utilizzo dell’energia a supporto non solo delle attività terminalistiche, ma anche delle port communities e dei territori circostanti.
Il confronto sviluppato al Taranto Eco Forum si inserisce in una fase di forte accelerazione delle politiche europee sulla decarbonizzazione del trasporto marittimo e sulla sostenibilità delle infrastrutture logistiche. In questo contesto, il cold ironing viene considerato uno degli investimenti chiave per ridurre l’impatto ambientale delle attività portuali, soprattutto nei grandi scali prossimi ai centri urbani.
Resta però aperta la questione della sostenibilità economica degli investimenti e della necessità di accompagnare il processo con strumenti regolatori e finanziari capaci di evitare effetti penalizzanti sulla competitività dei terminal italiani rispetto agli altri porti del Mediterraneo.
Used Cars Drain Syria’s Economy, Services, And Environment - Enab Baladi Enab Baladi
A ship arrives at Tartus port in Syria loaded with imported cars, 22 July 2025. (Syrian General Authority for Ports and Customs) Wassim al-Adawi | Muwafaq Al-Khouja Since imports were opened after the fall of the regime, Syrian roads have become a completely different scene. Hundreds of thousands of cars and vehicles flowed into the country within a few months, in one of the largest import waves the Syrian market has seen in decades. The wave left strong effects across economic, financial, social, and environmental fronts, at a time when the car market appeared to emerge all at once from years of stagnation and monopoly. With customs duties previously reduced by up to 80% and imports allowed for cars from model year 2011 and newer, the price map changed in an unprecedented way. Prices of some cars fell to a quarter of their value compared with the period of the former regime’s rule, and cars once considered a distant dream became accessible to a wider segment of Syrians. Showrooms, ports, and border crossings are filled with vehicles entering from Jordan and Turkey through the Nassib crossing and Tartus port. But behind this apparent revival, a heavy economic question emerges: how much did Syria pay for this wave? Despite the absence of precise official data, economic estimates place the value of imported cars at about $10 billion. These billions are massive sums that left an economy already suffering from weak production and a shortage of foreign currency, opening debate over the viability of directing this financial mass toward a consumer good instead of investing it in more urgent productive sectors. On another level, car imports are putting pressure on services, especially roads that were already not prepared to receive such numbers, in addition to being worn down by neglect and potholes. There is also broad environmental damage caused by the exhaust of used or modified cars. The phenomenon of car imports carries a clear economic contradiction. On one hand, it met a real social need after years of collapse in the transport market. On the other hand, it deepened pressure on the dollar and the Syrian pound exchange market. Syrian economic and financial expert Dr. Mohammad Taysir al-Faqih toldEnab Baladithat the problem does not lie only in the number of imported cars, but in the “opportunity cost,” meaning what the Syrian economy lost when billions of dollars went to cars instead of being pumped into agriculture, industry, or energy. As vehicle numbers expanded, other effects began to appear in succession: In light of this reality, the Syrian government later moved to stop the import of used cars in an attempt to regulate the market and limit the chaos that accompanied the broad import wave. The most important question, however, remained unanswered: was this boom the beginning of economic recovery, or merely broad consumption with deferred costs? No precise official figures have been published so far by the Syrian government or the Ministry of Economy and Industry on the total value of imported cars. The media office at the Ministry of Transport remained silent regarding questionsEnab Baladisent to the ministry about the number of vehicles imported since liberation to date, and the total value of the imported vehicles, approximately. As for the parties that imported the cars, imports were carried out by traders, private companies, individual importers, and local car showrooms that relied mainly on border crossings with Jordan and Turkey, especially the Nassib border crossing and Tartus port. The Ministry of Transport and the Syrian General Authority for Ports and Customs organized entry, customs clearance, and technical inspection procedures. The wave of car imports in Syria after the opening of imports is an economic phenomenon worth analyzing from two angles: A car ship arrives at Tartus port, 24 July 2025. (Tartus Governorate) Based on a reading of the vehicle import path from 8 December 2024 to 21 May 2026, and taking into account estimates that about 110,000 cars entered during the first months of 2025 alone amid rising commercial demand, al-Faqih said estimates closer to reality indicate that the total number of imported cars to date may exceed 500,000 vehicles. The figure may be higher if cars that entered through commercial crossings, not fully recorded in official statistics, are counted. The Syrian economist said this large increase reflects an exceptional shift in the structure of the Syrian market, as the car sector has become one of the largest drains on foreign currency in the recent period, with estimates that the import bill for other goods exceeded several billion dollars in less than a year and a half. The Ministry of Transport, through the director of its media office, declined to answerEnab Baladi’squestions about the number of vehicles that flowed into the country through imports since liberation, saying the Syrian General Authority for Ports and Customs was the body responsible for knowing their numbers. The Syrian General Authority for Ports and Customs, through its media director, said counting the number of imported cars and the volume of foreign currency paid to import them requires more time than was available at the moment this report was prepared. These figures, regardless of the margin of variation, reflect a large volume of resources being directed toward a durable consumer good that does not directly contribute to generating domestic added value or strengthening the economy’s productive capacity. Al-Faqih explained that the problem is not limited to the volume of imports itself, but extends to the opportunity cost, meaning what was economically abandoned when this mass of dollars was allocated to importing cars instead of being directed to agriculture, industry, energy, or productive transport. The impact of car imports in Syria after liberation, and within a short period, is reflected in a prominent model of directing a large financial mass toward a final consumer good that does not contribute to strengthening local added value or expanding productive capacity, but is instead absorbed entirely within its own consumption cycle. Based on the estimated average value of an imported car, Dr. Mohammad Taysir al-Faqih said the total value of cars that entered the Syrian market from 8 December 2024 to May 2026 ranges between $9 billion and $10 billion. This is an unprecedented figure in the history of the modern Syrian market, especially amid the absence of local production and the market’s near-total reliance on external imports. This financial mass is large, given the size of the Syrian economy and its limited capacity to generate foreign currency revenues. Al-Faqih stressed that the effect of these imports is not limited to trade, but extends to deepening demand for dollars, increasing pressure on the exchange market, and weakening market confidence in the local currency. The impact is more severe if imports are financed through informal channels, such as the parallel market or the conversion of Syrian pounds into dollars within the domestic monetary system, as this directly affects the supply of foreign currency and causes greater exchange rate fluctuations. If imports are financed through private savings or external transfers, the direct impact on the local market may be smaller in the short term, but it remains present at the level of the total import cost and resource drain. From a macroeconomic perspective, al-Faqih explained that imports cannot be evaluated only by whether they meet an immediate need, but must be viewed within the framework of opportunity cost. A dollar directed to importing cars cannot at the same time be directed to buying productive equipment, raw materials, agricultural supplies, or industrial inputs. In an economy suffering from weak productivity and declining real investment, priority should go to spending that strengthens capital accumulation and reduces dependence on imports in the future. Directing foreign currency to private cars provides a direct consumer benefit, but it achieves a limited productive effect compared with possible alternatives. From a purely economic perspective, it would have been more useful to direct a large part of this financial mass to agriculture, industry, productive transport, and energy, because these sectors generate income, jobs, added value, and reduce future imports. Cars, despite meeting a real social need, are at this stage mostly final consumption and do not generate a local value chain equivalent to the volume of foreign currency spent on them. Dr. al-Faqih considers the difference between the two paths significant: Therefore, spending on cars during a fragile recovery phase appears closer to satisfying a delayed consumer need than to development investment. Car imports are financed through multiple channels, including: In the Syrian economy, which has witnessed rapid market liberalization after a long period of restrictions, Dr. al-Faqih said the likelihood of activating irregular financing channels increases, because high demand for dollars creates wide profit margins and encourages informal intermediaries to enter the market. As a result, the car import wave may not have affected foreign trade alone, but may also have contributed to expanding unregulated exchange activity, increasing ambiguity in tracking the movement of foreign currency, and raising mediation and financing costs. The first commercial transport ship carrying cars arrives at Latakia port, 26 January 2025. (Latakia Governorate) Economic researcher Abdulazim al-Mgarbel believes the Syrian market can absorb part of the cars, but cannot absorb a large and unregulated influx. He said citizens’ purchasing power is limited, fuel is not always available at an affordable cost, and roads and technical services are not all ready for a major boom. Real absorption, therefore, should be achieved by prioritizing public transport vehicles, trucks, productive machinery, and low-consumption economy cars, rather than opening the door widely to consumer cars that increase pressure on fuel and congestion. The decision related to free zones confirms that the state is trying to regulate the entry of used cars and prevent their automatic transfer into the local market. The Syrian General Authority for Ports and Customs issued a decision allowing investors in free zones to bring in their used cars from neighboring countries and display them in their private showrooms, while activating the activity of “cutting up and dismantling” cars under regulations. The decision, published by the Syrian General Authority for Ports and Customs on 12 May, was based on minutes of a meeting between the authority’s presidency and the management of the General Establishment for Free Zones on 16 April. The decision required investors wishing to bring in their cars to submit an “official written pledge” containing three commitments: not placing the cars into local consumption, not demanding their registration or sale inside Syrian territory, and committing not to violate applicable laws and regulations. It also allowed the activation of “cutting up and dismantling” cars inside free zones, provided the activity is subject to joint supervision by the General Customs Directorate and the General Establishment for Free Zones. The Syrian General Authority for Ports and Customs set controls for this activity, most notably restricting it to free zones only and preventing complete cars or reassemblable chassis from entering the local market, in an attempt to combat the phenomenon of cut-up cars that were reassembled and sold to citizens. Absorbing large numbers of cars requires effective institutions in registration, licensing, insurance, technical inspection, traffic control, and fee collection. If vehicles enter faster than the state’s ability to regulate and monitor them, a gap emerges between actual reality and recorded reality, weakening the effectiveness of public policies and reinforcing manifestations of regulatory chaos. Syrian economic and financial expert Dr. Mohammad Taysir al-Faqih said the major expansion in car imports imposes challenges on customs and financial agencies, whether in valuation, collection, or combating evasion. In the absence of a precise administrative system, expected financial revenues from this activity may not materialize at the assumed level, reducing the positive fiscal impact. In environments marked by inflation and monetary instability, durable goods can turn into stores of value alongside gold and real estate. From this perspective, part of the demand for cars in Syria can be interpreted as “hedging demand” or as an “asset for speculation and profit,” not purely consumer demand. However, this hedging function, although understandable behaviorally, raises demand above its natural functional level and pushes prices toward further increases. The problem here is that the asset used to preserve value ultimately remains a consumed good that requires fuel, maintenance, and infrastructure. Possessing it therefore does not merely freeze value, but adds continuous operating obligations, worsening the economic burden at both the individual and macro levels. The Syrian insurance sector and banking services face a challenge in absorbing this new mass of vehicles, because the institutional structure required to manage a large number of cars needs accurate registration, risk assessment, insurance against accidents and theft, and organized financing and maintenance services. If the market brings in large numbers faster than institutions can regulate them, Dr. al-Faqih said the results are chaos in ownership, price disparities, and weak actual insurance coverage. This leaves part of the market outside formal frameworks, or at least less subject to them. The Syrian expert believes this large number of cars is likely to delay or complicate the process of regularizing cars, because administrative bodies need time to reset registration, fees, technical inspections, plates, and traffic systems. Dense imports may also create operational pressure on the relevant directorates, making licensing slower than the entry of cars itself. In this case, regulation retreats before the market, and the gap widens between what exists on the ground and what is officially registered. Regarding customs and tax returns, Dr. al-Faqih asks whether exemptions, smuggling, and informal settlements may have reduced the actual proceeds to less than expected. In theory, imports of this scale should have generated significant revenues, but the effectiveness of these revenues depends on the structure of fees, combating evasion, and the soundness of customs valuation. The absence of a quota system or protective restrictions can be interpreted, according to al-Faqih, by a transitional phase marked by a desire to liberalize the market quickly to compensate for the shortage in supply. But liberalization without controls in a fragile economy often turns into an import shock, not an organized market reform. It would have been better to implement a gradual policy that began with quantitative ceilings, set standards for vehicle age, favored economy, electric, or lower fuel consumption cars, and linked imports to financing resources that do not place major pressure on the domestic dollar market. Dr. Mohammad Taysir al-FaqihEconomic and financial expert From the angle of economic and financial policy in Syria, the optimal treatment appears to be based on gradualism and control, not sudden and unrestricted liberalization. According to al-Faqih, it would have been more useful to: Rapid liberalization in a fragile economy, according to the economist, carries the risk of turning into a broad import shock that redistributes resources toward consumer goods instead of supporting productive accumulation. Therefore, the issue is not rejecting imports in themselves, but subjecting them to the logic of development priorities and monetary stability. The economic impact of car imports is not limited to the moment of purchase. It extends to the vehicle’s operating cycle, as every additional car generates recurring demand for fuel, spare parts, oils, tires, technical services, and maintenance, in an environment suffering from limited oil supplies and chronic difficulties securing fuel derivatives. Economic expert Dr. Mohammad Taysir al-Faqih stressed that expanding the number of vehicles increases pressure on the fuel market and on the government budget, whether through direct support for fuel derivatives or through private imports. This growing demand also widens the trade deficit, because part of foreign resources does not go only to buying the vehicle, but also to financing its future use and its spare parts, which are imported later and almost continuously. Therefore, the real cost of a car is not measured by its import price alone, but by a long series of accompanying operating expenses. This reality makes the phenomenon’s impact on the macroeconomy much deeper than its apparent effect at the moment it enters the market. Economic researcher Abdulazim al-Mgarbel believes that bringing in cars in large numbers carries two opposite effects. On one hand, it may stimulate customs, showrooms, transport, insurance, repairs, and spare parts, and it may lower car prices if supply increases. On the other hand, it pressures foreign currency, because cars are an imported good that does not add direct production like machinery or industrial equipment. Therefore, its benefit to the economy remains limited if imports are directed only toward personal consumption, according to al-Mgarbel. If it includes trucks, buses, and productive machinery, its economic impact is better, according to al-Mgarbel, who said this aligns with a previous official approach that allowed new vehicles and restricted used ones, with exemptions for trucks, work machinery, and public transport. Al-Mgarbel believes the greatest impact of bringing in cars will be on fuel derivatives, because increasing their number means higher demand for gasoline and diesel in a country already sensitive to energy availability. There will also be a greater need for spare parts, oils, tires, and equipment, which may open a new market for traders and workshops, but will also increase the import bill. The structural dimension becomes more important in the absence of parallel infrastructure expansion. A rise in the number of cars without the appropriate development of roads, bridges, parking lots, traffic lights, and traffic management leads to worsening congestion, wasted time, higher transport costs, and erosion in the efficiency of infrastructure logistics services. These effects are not marginal, but represent real economic losses that reflect negatively on the Syrian economy. In addition, traffic congestion represents a type of social loss resulting from the uncoordinated use of shared infrastructure by members of society. According to Syrian economic and financial expert Mohammad Taysir al-Faqih, this problem is multiplied in the Syrian case because of weak public investment, declining road maintenance capacity, and the rising cost of rehabilitation. Accordingly, increasing private vehicles in a limited traffic and infrastructure environment may lead to opposite results. As for infrastructure, roads, parking lots, and repair shops may face major pressure, according to economic researcher Abdulazim al-Mgarbel, especially in cities that were not designed to absorb a sudden boom in vehicle numbers. Therefore, bringing in cars without a plan for public transport, traffic, and workshop regulation will turn the commercial benefit into a service burden. The impact of bringing in cars in large numbers is not limited to economic and service realities, but extends to the environment through the entry of poor-quality cars whose exhaust harms an environment already suffering from neglect in Syria. According to Syrian journalist Zahir Hashem, who specializes in environmental issues, bringing cars into Syria in large numbers, especially used and old cars, poses environmental risks directly linked to public health, air quality, energy, and the environmental economy. Among the most prominent effects are higher levels of air pollution due to increased emissions of toxic gases, fine particles, nitrogen oxides, and carbon, according to Hashem, who explained that these pollutants are linked to chronic respiratory and heart diseases. The problem becomes more complicated when imported cars are old or low-efficiency, especially with the use of low-quality fuel and the absence of technical environmental oversight. The issue is not limited to the age of the vehicle. It is also linked to weak maintenance and the spread of disabling environmental systems inside cars to reduce their cost, such as removing the catalytic converter, or “catalyzer,” a basic part of the car exhaust system whose function is to convert toxic exhaust gases into less harmful emissions before releasing them into the air. Removing it directly multiplies toxic emissions inside crowded cities. The environmental expert also pointed to other important environmental effects, including increased noise pollution, higher fuel consumption and the rising carbon footprint of the transport sector, and more hazardous waste from oils, batteries, tires, and damaged spare parts. This comes amid the absence of an effective system for recycling and environmental treatment, according to Hashem. Regarding the required measures, journalist and environmental expert Hashem believes the government is required to develop an integrated transport and environment policy, not merely import decisions or temporary bans. At the forefront of these measures is imposing “strict” standards on car imports, so that very old vehicles or vehicles with high emissions are banned, while mandatory environmental and technical inspection is adopted before licensing and periodically afterward. Permission to import should also be linked to modern international standards for fuel consumption and emissions. Hashem also believes it is necessary to improve the quality of local fuel, because poor-quality fuel disables pollution reduction systems even in modern cars. In addition, oversight of workshops that remove environmental treatment systems from cars must be tightened, and real fines must be imposed on vehicles causing thick smoke and air pollution. In the longer term, the problem cannot be addressed without developing mass public transport, encouraging less polluting means of transportation such as modern buses and hybrid and electric cars, and adopting urban planning that reduces excessive reliance on private cars, according to Hashem. Transit car exports resume through Latakia port, 29 April 2026. (Latakia Governorate) The Syrian economy, along with other issues, is still being formed following the fall of the former Syrian regime and the country’s entry into a new political phase. In this context, questions arise over the mechanism for regulating the car sector, based on the opinions of experts and experiences from neighboring countries. Economic analyst Radwan al-Debs believes Syria’s economic situation, in terms of legislation and laws, is still in the organization phase, including the car sector, which remains not fully regulated. While al-Debs notes that the government is focusing on other files, he believes the car sector must be placed among the priorities because it is a large service sector, has massive capital, and affects a wide segment of society. The car sector in Syria faces several problems, according to economic analyst Radwan al-Debs, as cars lose value over time. Many were imported from abroad before the fall of the regime, and others were imported after liberation. Among the problems is the presence of what became locally known as cut-up cars, which entered on the basis that they were spare parts and were later used. Some cars were plated in areas controlled by the Syrian Democratic Forces, the SDF, others in areas controlled by the Syrian Interim Government or the Salvation Government, in addition to cars that were present in areas of the former regime. Economic analyst al-Debs pointed to what he described as major overlaps, but he believes they can be solved through a group of experts. Economic analyst al-Debs does not fully agree with the ban, as he believes mechanisms applied in some neighboring Arab countries, such as Iraq, Gulf countries, Jordan, and Lebanon, should be adopted. These countries allow the entry of used cars, but under certain year restrictions. The ban leads to keeping cars inside Syria and therefore raising their prices, which is what happened at the start of the decision, when Syrians felt that no new cars would enter. The large and demand-imbalanced flow of cars prompted the Ministry of Economy and Industry to issue a decision banning the import of used cars starting 29 June 2025, given that many cars had entered since liberation that did not meet the required quality standards and had become a burden on infrastructure and the local economy. The ministry’s government communications director at the time, Qasim Kamel, said that during the period after Syria’s liberation, the northern market was open to car imports, which led to large quantities of cars entering through those areas because there were no complex customs restrictions like those imposed in areas of the former regime, where high taxes and fees weighed heavily on citizens. He confirmed that a decision was made to regulate imports across all Syrian geography, without going into the details of the decision or publishing it through official accounts. Regarding the permission to import tractor heads, public works machinery, and agricultural tractors up to ten years old, Kamel justified this by the productive nature of these machines, their long operational efficiency, and the high cost of new machinery. The exemption aims to support the agricultural, service, and transport sectors while reducing pressure on the import bill and foreign currency. However, the Economy Ministry’s decision exempted importers who had purchased cars before the date of the decision, provided they prove chassis numbers to the General Authority for Ports and Customs by 6 July 2025 inclusive. The decision allowed the import of new and unused cars, provided the year of manufacture is not more than two years old, excluding the year of manufacture itself. As the deadline approached, the Ministry of Economy and Industry granted an additional grace period to used car importers registered on the used car registration platform at the General Authority for Ports and Customs to regularize their status. The ministry said in its decision at the time that the grace period ends on 31 December 2025, and registrants must bring in the imported cars before the specified date. Violators of the decision will be subject to applicable laws and regulations. Al-Debs believes laws should be established similar to those in neighboring countries, allowing the entry of cars whose manufacturing date is five to seven years old, or sometimes up to ten years, on the condition that they do not enter commercially and that only individuals are allowed to bring in their cars. Some countries prohibit the sale of used cars until two or three years have passed and require certain specifications, such as that the car is not damaged or in need of many repairs, according to al-Debs. Jordan: Imported cars must not be more than five years old, in addition to the year of manufacture, for diesel or gasoline cars, while the limit is three years for electric cars. Every Jordanian or resident in Jordan has the right to import one car annually. By contrast, the import of flooded or damaged cars, or cars whose chassis has been damaged, is banned. Cars with right-hand drive and diesel-powered passenger cars are also banned. Lebanon: Cars more than eight years old may not be imported, while the age limit for motorcycles is three years. To import used cars, the chassis must be in good and sound condition, and the car must not be classified as destroyed or for scrap. Iraq: Conditions for importing passenger cars require that their manufacturing date not exceed five years, while the period is longer for heavy transport vehicles. The Kurdistan Region reduced the period to three years. The Iraqi government does not allow the entry of used cars that have been involved in accidents or suffered serious damage, such as burned or flooded cars, or cars exposed to floods, water, or any type of severe damage. Turkey: Used cars may not be imported. For imports, the car must be new and its year of manufacture must be the same year in which it is brought in. Economic analyst Radwan al-Debs noted that some countries set a service life for cars, for example, 30 or 35 years, while other countries allow the owner to use the car as long as it passes periodic technical inspection. Al-Debs believes old cars can be allowed to remain in use as long as they can pass a technical inspection and have no defects, because in that case, the owner will be the one to dispose of them. Setting a service life for cars would restrict old cars known as “antiques,” which are luxury cars and are usually rare. No government plan has been issued after the fall of the regime to deal with old cars up to the time this file was published. A car ship arrives at Tartus port from Korea, 30 September 2025. (Tartus Governorate) if you think the article contain wrong information or you have additional detailsSend Correction Twitter Telegram Newsletter